HUINENGYUAN 3pcs/Set Hydraulic Cylinder Piston Rod Seal Up U-Cup Installation Tool


Price: $33.99
(as of Jan 27,2022 03:01:49 UTC – Details)



Product Description

3pcs/Set Hydraulic Cylinder Piston Rod Seal Up U-Cup Installation Tool3pcs/Set Hydraulic Cylinder Piston Rod Seal Up U-Cup Installation Tool

Oil seal matters needing attention

The oil seal matching surface is flush with the reference surface of the housing to ensure the installation perpendicularity of the shaft after the shaft is installed, so that the oil seal lip is in line contact with the shaft surface to achieve a good sealing effect.

We did not install the handle to avoid the possibility of the product obstructing your view and causing the shaft and cavity to be scratched

The product is very convenient in daily life, saving your time, alleviating your work difficulties, you can choose us.

Small for rod diameters 22-40mm(0.87" - 1.57" ROD) gland hole, 6mm cross section max.

Small for rod diameters 22-40mm(0.87" - 1.57" ROD) gland hole, 6mm cross section max.

Medium for rod diameters 40-70MM (1.57" - 2.75" ROD) gland hole, 8mm cross section max.

Medium for rod diameters 40-70MM (1.57" - 2.75" ROD) gland hole, 8mm cross section max.

Large for rod diameters 70-165MM (2.75" - 6.49" ROD) gland hole, 10mm cross section max.

Large for rod diameters 70-165MM (2.75" - 6.49" ROD) gland hole, 10mm cross section max.

Small for rod diameters 22-40mm(0.87″ – 1.57″ ROD) gland hole, 6mm cross section max.

Medium for rod diameters 40-70MM (1.57″ – 2.75″ ROD) gland hole, 8mm cross section max.

Large for rod diameters 70-165MM (2.75″ – 6.49″ ROD) gland hole, 10mm cross section max.

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

Manual Instruction:

1. Put one handle into holder, place the seal on the claw. Lead the seal with one hand when turning the handle with the other.

2. Hold both handles then take them away from the holder.

3. Put the seal aside.

4. Release a handle then turn it ground gently.

5. Take twistor away from the gland smoothly.

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

Manual Instruction:

1. Put one handle into holder, place the seal on the claw. Lead the seal with one hand when turning the handle with the other.

2. Hold both handles then take them away from the holder.

3. Put the seal aside.

4. Release a handle then turn it ground gently.

5. Take twistor away from the gland smoothly.

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

Manual Instruction:

1. Put one handle into holder, place the seal on the claw. Lead the seal with one hand when turning the handle with the other.

2. Hold both handles then take them away from the holder.

3. Put the seal aside.

4. Release a handle then turn it ground gently.

5. Take twistor away from the gland smoothly.

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

Manual Instruction:

1. Put one handle into holder, place the seal on the claw. Lead the seal with one hand when turning the handle with the other.

2. Hold both handles then take them away from the holder.

3. Put the seal aside.

4. Release a handle then turn it ground gently.

5. Take twistor away from the gland smoothly.

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

 Hydraulic Cylinder Piston Hydraulic Cylinder Piston

Oil seal installation precautionsOil seal installation precautions

Oil seal installation precautions to avoid pollution of oil seal:

avoid deformation of oil seal,ensure shaft hole cleaning,use the appropriate fixture,jig to keep in good condition,to avoid oil seal tilt,installed in the right direction to ensure pressed in place,the rubber oil seal between the main lip and dustproof lip and lubricating oil,it is recommended to use the machine installation,oil seal is not allowed to repeat install and use

Making smaller size than gland hole by turning seal to omega shape can avoid most of damages.
Includes 3 sizes to cover just about any rod seal installation job from 0.87″ up.
Small for rod diameters 22-40mm(0.87″ – 1.57″ ROD) gland hole, 6mm cross section max
Medium for rod diameters 40-70MM (1.57″ – 2.75″ ROD) gland hole, 8mm cross section max
Large for rod diameters 70-165MM (2.75″ – 6.49″ ROD) gland hole, 10mm cross section max

Back to top button