(as of Apr 04,2022 05:29:24 UTC – Details)
①Make sure that all of the hardware is assembled securely and checked for stability before you install the monitors.
②The Desk Stand is designed to display two monitors between 13 and 27 inches in size. The maximum weight capacity of each monitor mount able to hold 17.6 lb. (8 kg).
③To prevent scratching during the installation process, you should handle the surface of the Monitors with care.
1.Assembling the Baseplate：
①Prepare the parts needed for the baseplate. Insert the five M6x12 mm screws through the five holes in the baseplate. Using the N Key, turn the M6x12 mm screws clockwise to tighten them.
②Use the N Key and K key to insert the three M5x18 mm screws and a M10x16 mm screw through the four holes into the pole.
2.Attaching the Monitor Arms
①Slide the monitor arms down the pole to the height that you want the monitors to be at. ②Use the L key to tighten the arms and prevent it from sliding down.
③Attach the five cable clips to the dual monitor arms and the pole which can organize all of your computer cables and protected them.
3.Attaching the Monitors:
①If the VESA mount sits flush against the installation surface on the monitor, insert the four M4x12 mm screws through the mounting slots on the VESA mount and into the mounting holes on the back of the monitor and tighten the screws.
②If the VESA mount doesn’t sit flush against the installation surface on the monitor, you need to use the provided spacers. Insert the four M4x30 mm screws through the mounting slots on the VESA mount, into the four spacers, and into the mounting holes on the back of the monitor and tighten the screws.
③Insert the monitor VESA mount into the crossbar and tighten the VESA mount with the M6 screw cap. Then you can use the M key to adjust the angle you want.
【Full Articulation】The monitor arms can be adjustable in various angle including +45°to -45°tilt, +90°to – 90°swivel, 360°rotation. The arms extend, retract and tilt to change monitor angles, rotating from landscape to portrait orientation, providing a more ergonomic position of your computer screens.
【13″ To 27″ Screens Compatible】The dual monitor mount is compatible with 2 screens between 13 to 27 inches in size and 17.64 lbs in weight with 75 x 75 mm or 100 x 100 mm VESA plate. The height of monitor arms is adjustable, you can move up or down of your screens. Note: Please remove the screens before adjusting the monitor arms.
【Free Standing Base】 Heavy duty base provides monitor mount solid stability while monitors are hold within its center of gravity. The bottom base covers with pad to prevent your desk from scratches or damages.
【Integrated Cable Management】Consolidate your power and AV cables into detachable cable clips on the arms and center pole. No more mess-up on your desk. Save your desk room utmost. Make your desk neat and clean.
【After-sale Service】Our friendly customer services team is available to answer your question within 24 hours. We will provide you 18 months warranty and replacement for this product. Welcome to contact us with any defective issue or questions you may have.