XMARTO RPT20 WiFi Security Camera Repeater/Range Extender – Works for XMARTO Plug-in WiFi Cameras and NVR with ver. 3.0+

From the brand

XMARTO milestones

In 2015, XMARTO released the 1st 1000ft long range WiFi camera system. In 2017, the WiFi range doubled with XMARTO Dream Liner WiFi Relay technology. In 2020, the WiFi Relay becomes automatic, and XMARTO PTZ cameras features AI with Auto-Track.In 2022, XMARTO released the solar security series with All-Weather-Charge.

XMARTO strives to bring customers peace of mind with top-notch products.

Wire-free Solar Security Set

【For All systems】Pair to NVR – bring the repeater close to the NVR, hold sync button for 10 seconds, repeater pairs to the NVR. When it’s done, the ‘NVR’ LED stays on. (this is the basic step needed no matter what your system version is)
【For G3 camera systems】Place it for Auto WiFi Relay – if your system is G3 (NVR version 3.0.7+, camera version 3.2+), you simply bring this repeater and plug it somewhere in the route NVR to cameras. Within seconds it connects to NVR with ‘NVR’ LED stays on; within dozens of minutes it detects connection status of close-by cameras; then connects to weak-signal cameras and relay back to the NVR. If cameras have acceptable connections to the NVR itself, it will not change the connection status.
【For G2 camera systems】Manual setting for G2 camera systems (NVR version 2): if camera A has intermittent connection to NVR, plug the repeater to somewhere in the route from NVR to camera A, then go to Camera Manage – WiFi Relay, add camera A behind repeater. When you do this setting, the camera A needs good connection to NVR so it receives commands from the NVR. That means, if camera A was having poor connection to the NVR, you better to take it down to complete settings and then mount back.
【View connection status】In NVR’s menu – Camera Manage – WiFi Relay, you can find the cameras’ connection status. Make sure the Auto WiFi Relay is checked.