Price: $33.00
(as of Dec 04, 2024 14:48:23 UTC – Details)
Product Description
DJI stabilizer shutter release connection port position
RSS cable (RSS-F,RSS-P,RSS-CR41,RSS-3.5mm, RSS-DC2,RSS-DC0,RSS-N3) Stabilizer models supported by these styles: DJI Ronin-sc,ronin-sc2,ronin-RS2,ronin-RS3/Mini/Pro,ronin-RS4/Pro,DJI Focus ProRSS of the stabilizer – camera control port. 1: Camera Control Cable Port “RSS” (DJI ronin – sc/rsc2 / rs2 / rs3 / rs4 / focus pro) have this camera control, used to connect the shutter release cable to control the camera work 2: After the stabilizer is turned on and the cable is inserted, the display will display “Shutter release cable is connected”, indicating that the connection is normal. If no, reconnect the cable. 3: The red button on the DJI stabilizer: there are 1 or 2 positions A) 1st gear: Gently press (half press) without release to control camera focus B) Gear 2: press the button to stop for 2 seconds and control the camera to take pictures
(RSS-F)USB-C TO Trs2.5 DJI Stabilizer shutter release cable
Type-C (USB-C) to TRS2.5mm DJI Stabilizer shutter release cable （RSS-F)Supported functions: Photo, focus/metering, video (camera set to video)Function: Replaces the shutter release button on the camera.Video recording function: When adjusting the camera to video, press the DJI red button to control the videoApplicable camera model; For FUJI-GFX100,GFX50S,GFX50SII,GFX100S,GFX50S/50R,,XH2S,XH2,XT5,XT2,XT3,XT4,XT20，XT30,XT30II,XE1,XE2,XE2S,XA3,XE3,XA5,XA7,XH1,X100V，X100T,X100F,X-T100
Note: must be set in the fuji camera – microphone / remote control project – select “remote control,” so that you can control the camera photos with DJI
– most models only need to adjust to the video file, press the shutter button to directly control the video.XT20.T30.T30II, The camera uses the MIC microphone jack on the camera, so you need to set the camera to the video file, and then go to the menu to find – “Microphone” – Microphone / Remote – select “Remote” to use
(RSS-P)for panasoni shutter release cable
DJI Stabilizer shutter release cable （RSS-P) for panasonicPort type: Type-C (USB-C) TO TRRS2.5MMSupported functions: Photo, focus/metering, video (camera set to video)Function: Replaces the shutter release button on the camera.Cables are soft and do not affect stabilizer rotation. Plug in directly to control the cameraThe plug needs to be pushed to the end to communicatePanasonic Camera shutter release Port REMOTE- on the top right of the camera, next to the SD card memory cardApplicable camera model:GH2,GH3,GH4,GH5,GH5S,GH6,S1,S1H,S1R,S5,S5II,s5m2xs,G9,G95,G90,G99,G85,GX7,GX8,GXL,DMCFZ(20/20K/20S/30/30K/30S/50/50K/50S/100/150/200/1000/2000),G1,G2,G3
RSS-N3 for canon shutter release cable
DJI Stabilizer shutter release cable （RSS-N3) for canonPort type: Type-C (USB-C) TO N3Function: Replaces the shutter release button on the camera.Cables are soft and do not affect stabilizer rotation. Plug in directly to control the cameraVideo Settings:R5, R5C settings: press MODE to AV, then press the camera button INFO once, the picture is converted to video file, select video M (manual exposure) – OK. Then enter the menu (1-7)Find “Shutter Button Function for Short Film” – Select Full Press – Start / Stop Short Film Shooting 1)Support Features:Photos,Focus / Metering2)Applicable camera model; for Canon R5,R5C,5D2,5D3
RSS-41 for siga shutter release cable
DJI Stabilizer shutter release cable （RSS-CR41) for sigma fp fplPort type: Type-C (USB-C) TO TRRS3.5MM Supported features: photos, videosFunction: Replaces the shutter release button on the camera.Cables are soft and do not affect stabilizer rotation. Plug in directly to control the camera4: Control recording Settings; Set the camera – “Shutter Settings” – REC, you can control the recording of video 5) The 3.5mm female plug can be connected to the external microphone, and the video and recording can work simultaneously. 6) Operation method: Gently press (half press) the red button on the DJl to control the focus of the camera, press (press to the end) and hold for 3 seconds – take a photo 7) The plug should be rotated into place to communicate with the stabilizer normally. 8) The 3.5mm plug should be rotated to the bottom, so that it can communicate normally (because it is tight, it needs some force
RSS-DC2 for nk shutter release cable
DJI Stabilizer shutter release cable （RSS-DC2) for nikonThe RSS-DC2 releases the cable and has no tap focus function. Lightly press (half press) the DJI stabilizer without letting go, and the camera focuses and takes photos simultaneously1)Support Features: Photos(Does not support half-focus) 2)Applicable camera model; For NIKOND7100,D7200,D750,D600,D610,D90,D5600,D5300,D3300,D3200,D5100,D5200,D75003)Some Nikon cameras can use the video function after setting the camera. Respectively-D7100,D7200,D750,D610,D7500Set the camera – “Shutter Line Settings” – REC, you can control the recording of video Operation method:How to operate: Tap (half press) the red button on the DJl for 3 seconds to control the camera shooting. Attention! Not to the bottom. If the camera does not respond, adjust the camera lens to MF/M and try again manually.
RSS-DC0 for nk shutter release cable
DJI Stabilizer shutter release cable （RSS-DC0) for nikon
1) Support functions: photo, focus, video
2) Applicable camera model; Suitable for Nikon-D850, d810, d800e, d800, z8, z9 camera shutter release jack in the lens Next to the circular 11-pin hole.
3) Video function operation method: Set the LV button on the camera, adjust it to the video position, and then enter the camera menu, “Customize. Meaning Settings “-” G4 Specify the shutter release button “; Select – Record animation, then press and hold the red key on the DJI for 3 seconds, and you’re good to go Control video recorded.
Function: Replaces the shutter release button on the camera.Cables are soft and do not affect stabilizer rotation. Plug in directly to control the cameraThe D800 D810 Z8 Z9 shutter release item is in the lower right position of the camera lensIf the operation does not respond, it may be that the camera lens focus time is too slow to focus, you can adjust the lens to MF/M Manual mode
DJI Ronin Stabilizer type-c socket position action
DJI Ronin Stabilizer type-c socket position actionRSS—The camera control connects the cable jack to control the shooting of the cameraII–Dji motor port. Connect the USB-C TO USB-C cable to the focus motor to control lens adjustmentI/wifi port,—image transmission jack, USB-C TO HDMI cable connected to the external display, to achieve real-time camera picture transmission
RSS-3.5mm cable
RSS-3.5mm for FUJI release cable
DJI Stabilizer to FUJI Camera Connection
1)Support Features:
Photos,Focus / Metering ,video(You can’t control recording until the camera is set to video)
2)Applicable camera model; for FUJI-GFX100II ,xs10,x-s20,x-t200,x-e4,x70
3)When the Fuji camera is set to the video gear, you can control the video
4)Applicable to DJI Brand Stabilizer Model:
Ronin-sc,Ronin-sc2,Ronin-RS2,Ronin-RS3,RS3 MINI,Ronin-RS3 Pro,Ronin-RS4,Ronin-RS4 Pro,DJI focus pro
5)Use process: plug type c terminal into DJI’s RSS interface, 3.5MM plug into camera MIC the door , boot can control the photo function.
6)GFX100SII The shutter release port of this camera is on the right side of the camera, above the SD memory card. Not a MIC MIC port
7)Thread length: 35 cm/13.7in, OD3.0mm .Weight: 30 g
8)Note: must be set in the camera – microphone / remote control project – select “remote control,” so that you can control the camera photos with DJI
9) The 3.5mm plug should be rotated to the bottom, so that it can communicate normally (because it is tight, it needs some force)
10) Camera Setup Method: Adjust the camera to video, then go to the camera menu, find “Microphone Port Settings”, or “Microphone/remote” option – select “Remote Control/Line”. You can control the shutter release.
Package Dimensions : 5 x 3.07 x 0.43 inches; 0.46 ounces
Item model number : RSS-DC2
Date First Available : August 9, 2024
Manufacturer : DYTDIEYINGTU
ASIN : B0DCNNLWN5
Country of Origin : China
How to operate: Tap (half press) the red button on the DJl for 3 seconds to control the camera shooting. Attention! Not to the bottom. If the camera does not respond, adjust the camera lens to MF/M and try again manually.
It can only support control photography, not half press focus (some camera models need to be set to record). After the cable is plugged in, the DJl stabilizer is turned on to directly control the photo without setting it up.
When using D750, please push the plug to the end, otherwise it will have bad contact and no reaction.
Pull the “LV” in the lower right corner of the camera to the video symbol, and then enter the menu (MENU)”Custom Settings Menu” -f Control – Select the “Camera” icon – Shutter Release button – Record video
Some Nikon cameras can use the video function after setting the camera. Respectively – D7100,D7200,D750,D600,D610,D7500 Set the camera – “Shutter Line Settings” – REC, you can control the recording of video
