Price: $21.95
(as of May 29, 2024 06:33:49 UTC – Details)
Product Description
Proxicast Through-Hole Screw Mount Active/Passive GPS Antenna with SMA Male Connector
Proxicast’s low-profile active GPS screw mount antenna is designed for use in fleet management, automatic vehicle location (AVL), position tracking for autonomous farm equipment, robots and drones, precision timing, mobile video and recreational navigation applications that require peak gain in a compact, vandal resistant form factor.
This antenna is ideally suited for vehicular GPS-enabled modems/routers and dedicated GPS receivers. The antenna can be used with passive or active GPS equipment via its integrated 28 dB low noise amplifier (LNA).
The antenna permanently mounts via a 1/2 in (12 mm) hole with internal nut. Low-loss RG174 coax is fed through center mounting post and pre-terminated with an SMA Male connector. A rubber boot creates a water-tight seal. The antenna is not removable from outside and there is no exposed coax cable once installed.
Electrical Specifications
Center Frequency: 1575.42 MHz ±1.023 MHz Bandwidth: 10 MHz min @S11≦-10 dB Passive Gain: 2 dBic (Zenith) on 2.4 x 2.4 in (60 x 60 mm) ground plane LNA Gain: 28 ±4.5 dB Typical Polarization: RHCP LNA Supply Voltage: 3.0 ~ 5.0 VDC Current Consumption: 13 ~ 22 mA V.S.W.R: < 2.0 Impedance: 50 Ω Noise Figure: < 1.5 @ 77°F (25°C) Axial Ratio: 3 dB (max @ 90°） Ex-Band Attenuation: 7 dB @CF±20MHz | 20 dB @CF±50MHz
Mechanical Specifications
Cable: Low-Loss RG174 (-005 = 18 in/0.5 m | -010 = 3.3 ft/1.0 m | -020 = 6.6 ft/2.0 m) Connector: SMA Male (-005 = Right Angle SMA Male) Material: ABS / Brass / Steel / Copper / Rubber / Adhesive Mounting: 0.5 in (12 mm) hole – nut, washer & rubber boot included Ingress Protection: IP67 Operating Temp.: -30°C to +80°C Dimensions: 2.0 x 0.75 in (50 x 19 mm) when mounted Weight: -005: 2.3 oz/65 g | -010: 2.5 oz/71 g | -020: 3 oz/85 g
LOW PROFILE GPS PUCK ANTENNA for Devices with External GPS Antenna Connectors
NARROWBAND L1 FILTER (1575.42 ± 1MHz Center Frequency) Improves GPS Reception (Signal-to-Noise Ratio) and Positional Accuracy
PERMANENT MOUNT – Through Hole Screw Mount Design for Vandal Resistant Mounting – No Exposed Cable
SMA MALE CONNECTOR on 3 ft (1.0 m) of Low Loss Cable – Works with Standard GPS Receiver Outputs
LOW NOISE AMPLIFIER – Boosts GPS Signal – 28 ± 4.5dB Gain – Compatible with 3~5V DC GPS Receivers (Passive Gain – 2 dBic Zenith)
WEATHERPROOF – IP67 rated – Perfect External GPS Antenna for Car, Truck, Van, Boat or RV – Made in Taiwan
#Proxicast #ActivePassive #GPS #Antenna #SMA #Hole #Screw #Mount #Puck #Antenna #Angle #SMA #Male #Connector #Coax #Lead #LNA #ANT190010
