Price: $109.80
(as of Jun 04, 2024 07:51:49 UTC – Details)
Overview
●UT-2788 RS-485 mode supports data (TXD or SD) sending control, thus improving the ability to adapt to various types of software and also simplifying the control mode.
●Fiber optic MODEM supports multiple fiber optic connections between asynchronous serial ports, it supports full or half duplex communication between two devices with asynchronous serial ports via fiber optic.
●UT-2788 supports two signal data transmission,all the serial ports is connected via terminal block; the optic fiber is connected via two ST ports.
Specification
● Point to point or loop circuit (point to multi point) connection
● Supports RS-232 asynchronous protocol
● Transmission Rate: 460kbps max
● With optional SC, FC, ST
● Supports maser-slave mode
● Slave mode: can be used as Hub
Original Packing Including
●1× RS-232/485/422 Dual-Fiber MODEM
●1×card Slot
●1×Warranty Card
It supports RS-232/485/422 asynchronous protocols; it can be mixed and matched to use 2 RS-232, RS-485 or RS-422 ports.
It supports 2 wires (half-duplex) RS-485 and 4 wires (full-duplex) RS-422 mode. The RS-485 mode supports data transmission (TXD or SD) control, this enhance the adaptation to most of the software.
It supports 2 asynchronous serial devices to communicate under full-duplex or half-duplex via optic fiber; the communication distance can be as far as 4km at multimode, and 20km at single mode.
The fastest transmission rate for RS-232 can be 115.2Kbps, and for RS-485/422 can be 460Kbps.
Ports with different electronic standards can be mixed and matched to use; it is without problem to connect RS-232 devices with RS-485/422 device.
#UOTEK #Industrial #RS232485422 #DualFiber #ModemBuiltin #Power #AC100240V #Delay #Conversion #Model
