Price: $7.98
(as of Jun 19, 2024 00:57:50 UTC – Details)
Product Description
WARM TIPS: BATTERY ADAPTER ONLY & COMPATIBLE WITH DEWALT 20V BATTERY AS WELL
Is there any way to tell if I should stop to use the battery?
If the reading of the voltmeter is lower than 13.75V, it indicates that the remaining power of the battery is low. Please stop using the battery.
Can I connect two batteries in series to achieve 36V?
Yes, but you should pay attention to the voltmeter because the original wiring method can only afford 32V. You can use another wiring method(there’s instruction on the included user manual) which makes it can afford 40V.
Is there any detail I should pay attention to when connecting two batteries in series?
Please be sure that the two batteries are both fully charged.
💎【Real-time Current and Voltage Display】Our battery adapter for power wheels is equipped with a mini LED display, so you can see the real-time current and voltage and judge whether the battery pack is suitable for the connected load easily. Effectively protect your battery and the device.
😎【Easy to use】The battery adapter compatible with Milwaukee will come with a wire connector, so you can use it much more easily. The first step is to connect your load with the adapter for power wheels by the included wire connector, try to turn it on for about 3 seconds, and constantly observe the reading of the ammeter. If the reading is in 3-8A, just start to enjoy. If the reading is more than 10A, the load is basically not suitable for an 18V battery pack.
✅️【Better Security & Premium Material】Our ETOOLAB adapters are equipped with 30Amp fuses to protect your battery from excessive transient current, and use 14 AWG copper wire to improve conductivity and safety. The products are made of high-quality ABS, good at moisture-proof and anti-corrosion, suitable for both indoor and outdoor use. Compared with other adapters for power wheels, we have a built-in switch to ensure you can control the battery easily.
✨【Wide Compatibility】Perfectly compatible with Milwaukee M18 battery, such as 48-11-1861, 48-11-1865, 48-11-1812, 48-11-1850, 48-11-1828 ect. This battery adapter is suitable for RC toys, robotics, and other DIY projects.
🔔【Warm Tips】The red wire should be connected to the positive terminal, and the black to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter, and the two wires shouldn’t be in contact. If you don’t use it for a long time, please be sure to remove the battery from the adapter. NOTE: BATTERY ADAPTER ONLY
#Battery #Adapter #Milwaukee #M18 #Battery #Adapter #Power #Wheelwith #LED #Ammeter #Voltage #Display #Fuse #Wire #Terminal #Battery #Adapter #AWG #Battery #Converter #DIY #Toys
